KISAE MW1210 Use and Care Manual download pdf (Page 10)



Page 10





generate by the inverter, those appliances may not work or may be damaged if they are

connected to the inverter. If you are unsure about powering any device with the inverter, contact

the manufacturer of the device.

Estimate Run time on Load

Following run time is an estimate based on using a 12V-120AH battery bank for reference. Actual

run time may vary.

Load Consumption Estimate Run time

Cordless Phone 5W 180 hrs

Clock/Radio 8W 135 hrs

Table Lamp 40W/60W 27 hrs/ 18 hrs

Freezer (8.8 cu. ft.) 80W 15 hrs

20” LCD TV 100W 11.5 hrs

Refrigerator (18 cu. ft.) 120W 9 hrs

Sump Pump (1/2 hp) 350W 3 hrs

Microwave (mid-size) 1000W 49 min

Coffee Maker 1200W 37 min

5. TROUBLESHOOTING

To trouble shoot the unit, please note the error code display on the main unit and review the

“Understanding the Error Codes” in section 4.

Problem Symptom Solution

No output voltage.

And Status LED is

off.

The unit is off Turn unit ON by following the instruction in

Section 4 to turn unit ON

No power to inverter Check fuse or the Disconnect switch (if

installed) is either blown or turn OFF

No AC output.

Status LED is

Green

GFCI was tripped Check load and reset the GFCI

No Output. Status

LED is in Amber

Check error code on

display

Verify the error condition and make

correction

Products

connected to unit

malfunction or

overheat

Products connected to

unit do not accept

modified sine wave output

(MW1210 & MW1215

only)

Products are not compatible with the

modified sine wave output generated by the

KISAE Power Inverter. See “AC Load on

Power Inverter” in Section 4

1 2 ... 5 6 7 8 9 10 11 12

Comments to this Manuals

No comments

KISAE MW1210 Use and Care Manual Page 10

Comments to this Manuals

Related products and manuals for Power adapters & inverters KISAE MW1210